How to Reset Your Sightmark Wraith 4K Max Digital Night Vision Riflescope (SM18030)
What is the reset button used for?
Glad you asked! On some occasions, you might need to conduct a manual restart or hard reset on the scope. This can be done using the manual reset button located on top of the unit. The only tool needed is either a thin paper clip or push pin. You'll then need to locate the reset button.
The reset button is located on top of the scope, in front of the navigation knob, and it appears as a small dimple within a recessed area. Take your paperclip or push pin and depress the button. Hold for approximately 3-5 seconds. You'll know you've pressed the button down far enough by feeling a slight click when you press down and release. After the reset is completed, you should be able to power up the scope and resume normal use.
If you have any questions concerning this topic or other Sightmark products, please feel free to Contact us.